China hid xenon kits, hid xenon bulbs manufacturer

• 
• 

Product Type: HID Series

Place of origin: China

Model No:

Price Terms: FOB, CIF

Payment Terms: L/C, D/P, T/T

Package:

Minimum Order:

Delivery Time:

Brand Name:

Price: $

Products Informatin

Name: Motorcycle Lamp H6
Power: 35 W
Luminous Flux: 3600L
Lifetime: 3000h
Color Temperature: 3000K, 4300K, 5000K, 6000K, 8000K, 10000K, 12000K, Blue, Purple, Pink and Green
Input Voltage: 9V-16V
Standard Input Current: 3.2A
Package: our box or OEM box

Instruction for Installation of Hid Motorcycle Lights:
1. Separate the headlamps (right & left) from your car after opening your car bonnet. If there is enough space for exchange, it is not needed to separate the headlamps from your car.
2. Open the rear cover of the headlamp and pull the installed halogen lamp out.
3. Drill a hole in the middle lf the rear cover of the headlamp with a 21mm hole cutter.
4. Take out the plastic cap of the HID bulb.(be careful not to touch the bulb.)
5. Put the HID lamp into the headlamp unit. ( caution: please confirm whether the installation of press spring has settled properly after installing the lamps. )
Caution: please check again whether the installation is proper after installing the lamps.
6. Connecting the wires-referring to the wiring diagram in the guide book.
7. Close the cap of the headlamp after fitting the rubber barking attached to the bulb’s wire into9 the unit’s cover.
8. Stick the ballast on the nearest place from the headlamp in the engine room firmly by using double-faced tape, cable tie and etc.
9. Connect the wire of the ballast with the wire of bulb.
10. Test whether or not the headlamps work properly.
*If both lamps don’t light at the same time or flicker ,change the battery to more than 60Ah since it results from the lack of electric power; or add relays to bear more than 15A since it results from the lack of electric current.
*Make sure to change the fuse for the headlight to at least more than 20A. If you use the fuse less than 20A, it tends to be out when the light turns on.

------------------------------------------------------------------------------------------
Reading and Answering:
1. What is Xenon light?
The hid xenon bulb is a micro-discharge bulb filled with a mixture of primarily xenon gas and other inert gases, creating a superior,bright,white light.This special bulb has no filament like a halogen bulb,but the light created between the two electrodes in a xenon bulb is like none other.
2. What are the advantages of xenon light?
The xenon bulb outputs more than three times the brightness than a halogen light, while consuming half the power(wattage).Not only will night driving be safer and clearer, more power is freed up for your car’s other functions.
Additionally, you will be doing your part fot the environment: less power consumption means less waste.The clear white light produced by the xenon bulb is similar to that of natural daylight. Research has shown that better lighting conditions make for better driving. The unique white color of the xenon light also reflects road markings and signs better than the colors emitted by conventional lighting svstems.
Cost-wise, the lifespan of the xenon bulb lasts the life of the car, meaning that under normal conditions, you should never have to replace the bulbs!
Bottom line, exceptional bright light, less power consumed, saves your money.
3. Why was Xenon Light Developed?
At least 60% of all traffic accidents take place in poorly lit conditions.
And the older the driver, the more light required for seeing better during night driving. Brighter lighting by xenon light means most importantly, better road safety and less strain on the eyes.

Warnings!
1. Consult a professional technician for installation. Do not attempt to install the system yourself. Installation by an inexperienced prson is not recommended and may result in potential danger.
2. To avoid electric shock, wear gloves when installing the system.
3. Securely install all ballasts,bulbs,wires and sockets to the car body. confirm these components are fastened properly before operation.
4. Never try to touch the bulb while it is on. Wait until the lights have cooled after turning them off. when the lights are operationg, the bulbs emit heat at high temperatures and can cause burns if touched before cooling.
5. Avoid looking directly into the xenon light to prevent potential damage to your eyes
 

Search

. All products search